Android OS Forum banner
1 - 20 of 101 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
Testing
Do you have successfully tested the ACMEInstaller4?
Yes1047.62%
No (Please describe your issues in forum)1152.38%
Do you have successfully installed TWRP?
Yes1152.38%
No (Please describe your issues in forum)1047.62%
Do you have successfully upgrade CWM?
Yes1571.43%
No (Please describe your issues in forum)628.57%
 

·
Registered
Joined
·
60 Posts
Hi guys,

I have seen many of you are asking for a new ACMEInstaller for Android 4.3 because this release required more space. After some investigate and work, i have made a new ACMEInstaller that increase the space of cm-system to 500MB.

I have tested this with Mac OS X 10.6.8 and the cm10 i have builded. Everything is working good.. Tested also with ACMEUninstaller and ok.

But some testing is always good..

Updated x5 (21 Nov)

I have made 2 ACMEInstaller one increase the space of 500MB (version 4) and another one 600MB (version 5).

Download here the ACMEInstaller4 http://www.mediafire.com/download/yvelgeu2r9qu9f0/ACMEInstaller4

MD5 = 0e10a6bc14420b606c27354ba9ca3587

Download here the ACMEInstaller5 http://www.mediafire.com/download/jnvk3zoku1d9po7/ACMEInstaller5

MD5 = 593331fde31c36125dfa4c37b10712f9

This two version fix also the installation of GApps for Jelly Bean.

Based on the request of users i have made this version of ACMEInstaller compatible with TWRP!

Download here the ACMEInstaller4T http://www.mediafire.com/download/6q0zjyrk54t0c6y/ACMEInstaller4T

MD5 = 83788f4b0be593034ec0672da131f6be

Download here the ACMEInstaller5T http://www.mediafire.com/download/o33b89sbyadkiqd/ACMEInstaller5T

MD5 = e7200bc5c0d4f9efd90052da7d96a13b

Notice that version is working and required TWRP recovery! You can download here http://www.mediafire.com/?a04hmkv4qcww9ac
the TWRP zip installer. MD5 = 2c2f6dc5f1b50520461fbaa401f6d796

Also an update zip installer of CWM for using with ACMEInstaller is available here http://www.mediafire.com/?4oed5g5x4xa81xo
MD5 = 642D7FA8162251CAE98987E1DC151011

And i don't have finished yet.. I have made also an update package of TWRP and CWM (Don't use for the first install with ACMEInstaller(T)!)

1) A flashable .zip of TWRP 2.6.3.0.. You can download here http://www.mediafire.com/?z20bnu8vcoan9tc and flash in ClockworkMOD

MD5 = 02758221B85D511D877359B21CBC423F

Use this package if you want install TWRP after the first install with ACMEInstaller!

2) An update for ClockworkMOD (6.0.2.8) builded with CM10.. You can download here http://www.mediafire.com/?977hzd8lmlz5o5l and flash in TWRP

MD5 = 018130A3127ECA431E6D5DDA13A6C075

Use this package if you want install CWM after the first install of ACMEInstallerT!

Don't do Wipe after installing! And remember this is only upgraded (optional) package!

And for the end.. ACMEUninstaller2!

This update remove also TWRP image and Evervol nightly if you have tried.

You can download the new ACMEUninstaller2 here http://www.mediafire.com/?yn79crki8xnan0y
MD5 = FED676F569E802E7D427E7BB926F61A4

Update x2

I made the ACMEInstaller compatible with Evervolv! I'm testing from this morning and is working!

Tested with Evervolv | 3.3.0p1 (Android 4.3.1).

Download the ACMEInstaller4E here http://www.mediafire.com/download/c97x5veuvjhuv1r/ACMEInstaller4E

MD5 = a545cef1d6203ada76fc1cfe93f4c807

Download the ACMEInstaller5E here http://www.mediafire.com/download/86osdtuh9bhfp8e/ACMEInstaller5E

MD5 = b4823de6dce17767b62a199b78d1023d

Do you need more information? See here http://rootzwiki.com/topic/107690-acmeinstaller4-testing-and-other-things/page-3#entry1529746

Update x3

I made the ACMEinstallerE (Evervolv) compatible also with TWRP! Based on the request of @Y314K

Download the ACMEInstaller4ET here http://www.mediafire.com/download/gpcqr1s5irddb41/ACMEInstaller4ET

MD5 = 08cd050bc7ae00f3d1f3df974acb10a6

Download The ACMEInstaller5ET here http://www.mediafire.com/download/b88ll60nq3rtwng/ACMEInstaller5ET

MD5 = ee82efdf30a7a4309b35a907b5b29c46

Do you need more information? See here http://rootzwiki.com/topic/107690-acmeinstaller4-testing-and-other-things/?p=1533954

Update x4

I made the ACMEInstallerM compatible with CyanogenMod nightly of Milaq!

Download and see the instruction here http://rootzwiki.com/topic/107690-acmeinstaller4-testing-and-other-things/page-5#entry1537434

Update x5

A new update for all ACMEInstaller! Reading what's new here http://rootzwiki.com/topic/107690-acmeinstaller4-testing-and-other-things/?p=1547698

Do you looking for the links for ACMEInstallerM?

Download the ACMEInstaller4M here http://www.mediafire.com/download/6gr5lgcs5vea3rw/ACMEInstaller4M

MD5 = a9bac564b9cc21381b659fbe24dbcf78

Download the ACMEInstaller5M here http://www.mediafire.com/download/kqceleh2ybk4wsl/ACMEInstaller5M

MD5 = ee82efdf30a7a4309b35a907b5b29c46

Disclaimer : I'm not responsible for any damages!

FAQs

What is the difference between ACMEInstaller, ACMEInstallerT, ACMEInstallerE and ACMEInstallerM?

ACMEInstaller is the classic installer you've always used. The difference for ACMEInstaller4 and 5 is the partition of cm-system. On version 4 is 500MB and on version 5 is 600MB.

ACMEInstallerT is also the classic installer with the difference of the space but this installer can flashing only the TWRP Recovery! You can't use CWM with this installer but TWRP.

ACMEInstallerE is also the classic installer with the difference of the space but this installer can flashing only the Evervolv ROM! You can't use Cyanogenmod ROM with this installer.

ACMEInstallerET is also the classic installer with the difference of the space but this installer can flashing only the Evervolv ROM and TWRP Recovery! You can't use Cyanogenmod ROM and CWM recovery with this installer.

ACMEInstallerM is also the classic installer with the difference of the space but this installer can flashing the CyanogenMod ROM of Milaq! (Compatible with Invisiblek ROM)

So... If i want install CyanogenMOD and TWRP which ACMEInstaller i need to use?

You need to use ACMEInstallerT. For make more simple this is the instruction:

ACMEInstaller = create cminstall folder and puting inside CyanogenMod ROM, CWM Recovery, gapps and Moboot.

ACMEInstallerT = create cminstall folder and puting inside CyanogenMOD ROM, TWRP Recovery, gapps and Moboot.

ACMEInstallerE = create cminstall folder and puting inside Evervolv ROM, CWM recovery, gapps and Moboot.

ACMEInstallerET = create cminstall folder and puting inside Evervolv ROM, TWRP recovery, gapps and Moboot.

ACMEInstallerM = create cminstall folder and puting inside CM rom of Milaq, CWM of Milaq, gapps, Moboot and APE data

See here for better instruction http://rootzwiki.com/topic/107690-acmeinstaller4-testing-and-other-things/page-5#entry1537434

ACMEInstallerM (2 configuration) = create cminstall folder and puting inside CM rom of Invisiblek, CWM Recovery, gapps and Moboot.

Based on your configuration uses the ACMEInstaller right for you.

So... the process is still the same?

Yes. Create cminstall and puting the right ROM or Recovery you want install. Copy the ACMEInstaller right for you in folder where is novacom (This is based on your system) And

novacom.exe boot mem:// < the acmeinstaller you choose

Done.

If u still have problems, just wait the tutorial from RolandDeschain79.

What is the difference between twrp-2.6.3.0-tenderloin.zip and update-twrp-2.6.3.0-full-tenderloin.zip ?

The first is a simple installation package that can flashed with CWM recovery.

The second is a full installation package that need to be used with ACMEInstallerT or ACMEInstallerET.

Don't use the second with CWM or you got bad things! The second package delete every recovery you have already installed and set the default recovery with TWRP.

This apply also for update-CWM6_tenderloin-20131019.zip and update-CWM6_tenderloin-full-20131019.zip

If you want simple update CWM use the first package with TWRP.

And ACMEUninstaller2?

Everything here is the same. The difference is ACMEUninstaller2 can deleted also TWRP and Evervolv uImage.

This is my first things in Android World.. I hope i can learn soon, so in future i can help also in contributing for the ROM(s).

Thanks

N.B.

All the thanks for the ACMEInstaller to Green! I have only made a simple modify.

The .zip(s) is based on jcsullins clockworkmod zip! So thanks him to put me in the good road
 

·
Registered
Joined
·
1,265 Posts
Hi guys,

I have seen many of you are asking for a new ACMEInstaller for Android 4.3 because this release required more space. After some investigate and work, i have made a new ACMEInstaller that increase the space of cm-system to 500MB.

I have tested this with Mac OS X 10.6.8 and the cm10 i have builded. Everything is working good.. Tested also with ACMEUninstaller and ok.

But some testing is always good..

You can download the new ACMEInstaller here http://www.mediafire.com/?9px74acnupl7fcd

I have made also two another things..

1) A flashable .zip of TWRP 2.6.3.0.. You can download here http://www.mediafire.com/?z20bnu8vcoan9tc and flash in ClockworkMOD

2) An update for ClockworkMOD (6.0.2.8) builded with CM10.. You can download here http://www.mediafire.com/?977hzd8lmlz5o5l and flash in TWRP

Don't do Wipe after installing!

ClockworkMOD is only an update package! Use the package provide jcsullins for the first time install.

You know.. You can always install manually if you prefer.

Disclaimer : I'm not responsible for any damages!

This is my first things in Android World.. I hope i can learn soon, so in future i can help also on contributing for the ROM.

Thanks

N.B.

All the thanks for the ACMEInstaller to Green! I have only made a simple modify.

The .zip(s) is based on jcsullins clockworkmod zip! So thanks him to put me in the good road
Fantaistic too see an ACMEInstaller4, thank you iMarck90! I will test out these new zips, we really needed a flashable version of TWRP and a CWM update is great to have.

What would you say to increasing the ACME4 System partition size to 600MB, for future proofing :grin: Dorregaray has a good point.

This is really great I can make a new how to install Android video with all these great new packages and ACME4. Just need to test them out and talk to Mpgrimm2 about updating the packages. We could even have a CWM and a TWRP package now, its so good to have new zips to flash for my HP TP :fox: Kitkat here we come!!
 

·
Registered
Joined
·
854 Posts
From what I've heard from early ports to sgt2 is its actually smaller then 4.3.1 roms.

Sent from my TouchPad using RootzWiki mobile app
 

·
Registered
Joined
·
854 Posts
Are the recoveries for datamedia builds or sdcard builds?

Sent from my TouchPad using RootzWiki mobile app
 

·
Registered
Joined
·
4,922 Posts
This thread should moved or at least duplicated in the HP TouchPad forum. I think you will get more exposure and traffic if it's moved or duplicated in that forum. Nice job creating ACME4.

Curiosity question, where are you from?
 

·
Registered
Joined
·
460 Posts
Thanks for the heads up Roland and kudos to iMark for putting it together. I agree this needs testing and some visibility for the seasoned folks who are comfortable with the process before telling all the first timers to give it a go. Maybe iMark can throw a poll at the top to track how many people have successfully used Acme4, the TWRP for Acme4 and the CWM update pack. When I get a chance to download (at home), I can host some trial cminstall packages for Roland with whatever 4 files he wants in this thread for both he and iMark. I will check my PM's.

(Still trying to get a successful upload to AFH for alternative/extra hosting on top of Dev-Host).

Honey Do list:

- build/assemble a 7 foot "buffet" table for storing griddle/crock-pots etc, by Thanksgiving.. uh maybe Christmas.
 

·
Registered
Joined
·
60 Posts
Discussion Starter · #9 ·
@RolandDeschain79 No problem. I can create easy a new ACMEInstaller5 that increase the space to 600MB.

@Gradular Standard way (Sdcard).. I never tested the new method of Milaq maybe i can see later..

@nevertells I have made here because this is the section for development.. For now more than 30 downloads. Good.
I come from Italy.

@Mpgrimm2 I have do.. Now let's waiting the users ;)

No problem guys.. I hope this can help the users and the devs of the ROM.
 

·
Registered
Joined
·
60 Posts
Hey guys, please if you have already downloaded the ACMEInstaller4 and have used, do a uninstall with ACMEInstaller and using again with the new ACMEInstaller4.
I have noticed only now, that i have freed more space than needed.. So this involve a large losing of free space for SDCard.

You can download the new ACMEInstaller 4 here http://www.mediafire.com/?a1jux8udd9l6tkl

And i have made also an ACMEInstaller5 with 600MB of space. You can download here http://www.mediafire.com/?31amvhwt64cky83

The first post is updated with the new version.

Sorry if i have notice only now
 

·
Registered
Joined
·
4,922 Posts
Hey guys, please if you have already downloaded the ACMEInstaller4 and have used, do a uninstall with ACMEInstaller and using again with the new ACMEInstaller4.
I have noticed only now, that i have freed more space than needed.. So this involve a large losing of free space for SDCard.

You can download the new ACMEInstaller 4 here http://www.mediafire.com/?a1jux8udd9l6tkl

And i have made also an ACMEInstaller5 with 600MB of space. You can download here http://www.mediafire.com/?31amvhwt64cky83

The first post is updated with the new version.

Sorry if i have notice only now
So how much space was the old ACME4 freeing up by accident?
 

·
Registered
Joined
·
1,265 Posts
Hey guys, please if you have already downloaded the ACMEInstaller4 and have used, do a uninstall with ACMEInstaller and using again with the new ACMEInstaller4.
I have noticed only now, that i have freed more space than needed.. So this involve a large losing of free space for SDCard.

You can download the new ACMEInstaller 4 here http://www.mediafire.com/?a1jux8udd9l6tkl

And i have made also an ACMEInstaller5 with 600MB of space. You can download here http://www.mediafire.com/?31amvhwt64cky83

The first post is updated with the new version.

Sorry if i have notice only now
Thanks again iMarck90 for helping to keep our tablet stay current :winkP: I will test it all out tonight and post back with results. The poll is a great idea for getting feedback. Once I test it all, I'll make a video about it and ask other users to test it out too :grin:
 

·
Registered
Joined
·
4,922 Posts
@iMarck90, wondering if your zips that install CWM or TWRP remove the other recovery when flashed? It was a problem in the past that there was not enough space in the /boot partition to accommodate both programs at the same time. TeamWin's Open Recovery Script solved the issue by removing CWM when TWRP was installed. There is also the issue that when ACMEUninstaller is used, TWRP is not removed from the /boot partition, so when a user tries to install Android along with CWM, the CWM install fails because there is not enough room in /boot.
 

·
Registered
Joined
·
60 Posts
The TWRP and CWM zip remove the current version and install the version from the package but the issue with ACMEUninstaller is still there, because he isn't removed the TWRP Image like also if you try other ROM (example Evervolv). Do you need to remove manually.

No issue with a new installation, because the CWM package from jcsullins remove the TWRP image, i have tried for testing the new ACMEInstaller nine times and everything is always working ;)
 

·
Registered
Joined
·
1,265 Posts
The TWRP and CWM zip remove the current version and install the version from the package but the issue with ACMEUninstaller is still there, because he isn't removed the TWRP Image like also if you try other ROM (example Evervolv). Do you need to remove manually.

No issue with a new installation, because the CWM package from jcsullins remove the TWRP image, i have tried for testing the new ACMEInstaller nine times and everything is always working ;)
@iMarck90, wondering if your zips that install CWM or TWRP remove the other recovery when flashed? It was a problem in the past that there was not enough space in the /boot partition to accommodate both programs at the same time. TeamWin's Open Recovery Script solved the issue by removing CWM when TWRP was installed. There is also the issue that when ACMEUninstaller is used, TWRP is not removed from the /boot partition, so when a user tries to install Android along with CWM, the CWM install fails because there is not enough room in /boot.
iMarck90... Can u'r new TWRP .zip be installed directly thru ACMEInstaller 4/3 like in the past... Or can the .zip only be installed thru another recovery...

Will just adding the "update-" to the name of the .zip be enough ???
Hey Guys,

I'm actually testing all of this right now :fox: I have both CWM and TWRP installed and both fully function. I was going to point this out but NT beat me to it. So far no problems running both but I will need to test making backups with both installed. I flashed the Rom and gapps with both so that works.

I have just done my first install with ACME5 and the new update-CWM6_tenderloin-20131019. Everything appears to be working fine. My partition size is @ 261/591MB, time to install my new Simpsons tree house of horrors bootamination(42.18MB). I can make them huge now since I have such a massive system partition :emoji_u1f604:

Thank you so much iMarck90 you've really helped to move things along with our aging but incredible tablets :grin: I will do somemore installs and test out using TWRP with the new ACME5. I also modified the old batch files for ACME5, i'm too lazy to type it over and over during testing Download: Happy flashing
 
1 - 20 of 101 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top