Android OS Forum banner
1 - 16 of 16 Posts

·
Premium Member
Joined
·
143 Posts
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.

NOTE: JB 4.2 will move anything in /sdcard to /sdcard/0 on first boot. If you revert back to JB 4.1 you will have to manually move things back

These are Unofficial CM 10.1 builds for the Verizon Note 2 I605.

PreReq: Bootloader Unlocked!

Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (http://goo.im/gapps)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot

Known Bugs:
- nfc is flaky
- Orientation sensor sometimes needs screen off/on a few times to start
- GPS may or may not work

[Alpha 1]ROM: http://www.androidfi...275921635705050
Mirror: http://androidhosting.org/Devs/Sbrissen/cm_i605-ota-eng.sbrissen42_ALPHA1.zip
Changes:
- Initial Release

Source: http://github.com/sbrissen

Thanks to all my testers and those that helped me get a note 2!

Credits:
Team Hacksung
CM
TSM
imnuts
slick_rick
AdamOutler/Ralekdev
 

·
Registered
Joined
·
4 Posts
I have tried several times to flash this rom.. I get the error failed... no MD5 file found.. I wiped cache,dalvik,system, and did a factory reset,, Do I need to flash a different kernel? I have flashed perseus.alpha30.1 and also have flashed Bullet_122512_13-52 with other roms and have had no problems. have flashed cleanrom3.5, cleanrom ace 4.0.5 and others.. I cant seem to get cyanogenmod to flash.. any suggestions? i have tried flashing with other gapps and get the same error.. i do flash using TWRP, not CWM.
 

·
Registered
Joined
·
4 Posts
I have tried several times to flash this rom.. I get the error failed... no MD5 file found.. I wiped cache,dalvik,system, and did a factory reset,, Do I need to flash a different kernel? I have flashed perseus.alpha30.1 and also have flashed Bullet_122512_13-52 with other roms and have had no problems. have flashed cleanrom3.5, cleanrom ace 4.0.5 and others.. I cant seem to get cyanogenmod to flash.. any suggestions? i have tried flashing with other gapps and get the same error..
Your checking for the hash file when flashing I believe

Sent from my SCH-I605 using Tapatalk 2
 
1 - 16 of 16 Posts
Top