[frostincredible]

Mod Type:: Script

Difficulty:: Very Easy

Mod Status:: Stable

Apply In:: Alt. Recovery

Optional:: Overclocked

Requires Root:: Yes

Source::

init.d Script to load tekahuna's OMAP4 Overclock Modules​

by: frostincredible​

Disclaimer: You are responsible for your own device. If you do something to it then blame me, I shall laugh at you.​

Requirements:​

-OMAP4 Device​

-tekahuna's "symsearch.ko" and "opptimizer.ko" modules​

---(instructions at link in step 1)​

-Rooted​

-CWM (or CWM compatible recovery)​

-ROM with init.d support (stock OEM ROMs do not support init.d, if on an OEM ROM go here: http://forum.xda-dev...d.php?t=1294009)​

Instructions:​

1. Go here and install tekahuna's overclock modules (these are NOT included in the ZIPs found on this page, you must download them from HIS site): http://rootzwiki.com...fficial-thread/​

2. Follow his instructions only up to stage 5.​

3. Download the ZIP corresponding to the speed you want to run. (e.g. 1100MHz = 1.1GHz).​

4. Place ZIP on SDCARD​

5. Boot into CWM (or other compatible recovery, stock will NOT work).​

6. Flash ZIP​

7. Reboot and open a 3rd party app such as ROM Toolbox or SetCPU and move MAX slider all the way up, should be running now at speed of the ZIP you flashed.​

ZIPs: (The 1.0GHz is to go back to stock)​

1000MHz (1.0GHz) ----- http://dev-host.org/...0GHz-signed.zip​

1100MHz (1.1GHz) ----- http://dev-host.org/...1GHz-signed.zip​

1200MHz (1.2GHz) ----- http://dev-host.org/...2GHz-signed.zip​

1225MHz (1.225GHz) -- http://dev-host.org/...5GHz-signed.zip​

1250MHz (1.25GHz) ---- http://dev-host.org/...5GHz-signed.zip​

1275MHz (1.275GHz) -- http://dev-host.org/...5GHz-signed.zip​

1300MHz (1.3GHz) ----- http://dev-host.org/...3GHz-signed.zip​

1400MHz (1.4GHz) ----- http://dev-host.org/...4GHz-signed.zip​

1500MHz (1.5GHz) ----- http://dev-host.org/...5GHz-signed.zip​

Thanks:​

tekahuna for starting this idea with his Overclock modules.​

wildstang83 for teaching my scripts back when I was on the Incredible.​

 

[Frankie]

Thank you for this! Will flash when I get home.

Will we need to max out the max slider in setcpu with every boot?

Sent from my DROID BIONIC using Tapatalk

 

[tekahuna]

@frostincredible: Thank you!

Thank you for this! Will flash when I get home.

Will we need to max out the max slider in setcpu with every boot?

Sent from my DROID BIONIC using Tapatalk

Just once, or when you change the clock speed. So, once you have it set with the init.d script, set it after your next reboot and you shouldn't have to set it again.

 

[frostincredible]

@frostincredible: Thank you!

No problem. Wouldn't be possible without you're making the overclock modules, so you thank you again for those. I linked back to your thread in the OP as yours requested, and kept the modules out of the zips. If you want something added/deleted/changed just tell me.

 

[Frankie]

@frostincredible: Thank you!

Just once, or when you change the clock speed. So, once you have it set with the init.d script, set it after your next reboot and you shouldn't have to set it again.

Great! Thanks!

Sent from my DROID BIONIC using Tapatalk

 

[Frankie]

I have 1 last question. Just to be absolutely sure does the zip file need to be on the internal card or the external card?

I am pretty sure you mean the external card but I just want to be sure.

Thanks a lot

Sent from my DROID BIONIC using Tapatalk

 

[jamesa]

I am still getting only 1GHz on the 1.2 shoo I have to change settings in

 

[jamesa]

I am still getting only 1GHz on the 1.2 shoo I have to change settings in set cpu

 

[frostincredible]

I have 1 last question. Just to be absolutely sure does the zip file need to be on the internal card or the external card?

I am pretty sure you mean the external card but I just want to be sure.

Thanks a lot

Sent from my DROID BIONIC using Tapatalk

Can be on either

 

[unchoney]

I wonder if this will work on ics4bionic?

 

[Frankie]

I wonder if this will work on ics4bionic?

I doubt it since its still in the alpha stages.

 

[frostincredible]

I doubt it since its still in the alpha stages.

It's probably possible...just no point, since as you mentioned, it's alpha.

 

[dragon]

Hey frost man I don't even know if I am in the right one or not but I can't find it my question is can we use root explorer to copy the 2 files we need? thanks sorry for the noob question

 

[Frankie]

Hey frost man I don't even know if I am in the right one or not but I can't find it my question is can we use root explorer to copy the 2 files we need? thanks sorry for the noob question

Yup.

 

[unchoney]

Ics4bionic successfully oc'd at 1200...just wanted to see how fast this would

 

[razz1]

Ok...I have the modules installed.
I know they work, cause I can run the commands in terminal. But I have installed this zip in cwm, and cant get it to work. I have tried 2 different zips with no luck. Anyone know what I'm doing wrong?

Sent from my DROID BIONIC using RootzWiki

 

[jamesa]

I have tried it over and over its still maxing at 1 however I flashed the 1.2 & 1.25 and neither over clocked. They say they installed fine via bootstrap. I tried via clockwork and it didn't work. I moved the two .ko filled over with root explorer then flashed and still the 1.0

 

[Frankie]

I have flashed 1.2 successfully and it's working fine. Even restarted again after the initial boot up (after exiting CWM) and SetCPU shows 1200 as the max.

Thanks frost and tekahuna!

I wonder why its not working for you guys above though...What rom and system update are you guys running? I'm on .901 Eclipse.

 

[razz1]

I'm on stock. 901 rooted.
Just wont do it for me! I have setcpu and rom toolbox to play with but none bring me over 1ghz. I dunno???

Sent from my DROID BIONIC using RootzWiki

 

[Frankie]

I'm on stock. 901 rooted.
Just wont do it for me! I have setcpu and rom toolbox to play with but none bring me over 1ghz. I dunno???

Sent from my DROID BIONIC using RootzWiki

The overclock modules work when you do it manually, correct?

Sent from my DROID BIONIC using Tapatalk