[Steady Hawkin]

The Tiamat kernel is confirmed to work on both 3G/4G and Wifi Only Xooms​

*This kernel is for 3.1 ONLY*​

***Credit for Tiamat Goes To Bigrushdog and Team Tiamat!!!***​

-Tiamat Version 1.4.4-
1.7 Support

***READ CAREFULLY***​

As a reminder you must be unlocked and rooted!

Install Instructions:

1- SELECT BOOT IMG FOR DEVICE FIRST

2- NEXT SELECT OC KERNEL

3- FLASH BOOT.IMG FIRST AND THEN KERNEL SECOND, BACK TO BACK IN CWM


There are a few different ways to do this, this is what I do-

1) Download ROM Manager (Free or Paid)
2) Download the zip from the link below
3) Move zip to your external SD card
A- Using a file explorer ( ex. Root Explorer), copy and paste the .zip file to your external sdcard (/sdcard/external)
OR
B- Put the zip on your SD card using your PC
4) Open Rom manager
5) Press the second button (Reboot Recovery)
Xoom will boot into recovery
6) Use volume rocker to select install zip from sdcard (Press power button to confirm)
7) Use volume rocker to select choose zip from sdcard
8) Select the boot zip file placed on the sdcard
9) Select yes
Xoom will flash file and put you back onto recovery screen
10) Repeat For OC Kernel of choice
11) Select Reboot
12) Sit back and bask in the glory

Download:

3G Boot Img

Charge Light On- [BOOT] 3G Charge On - Downloads - Android Forum
Charge Light Off- [BOOT] 3G Light Off - Downloads - Android Forum

Wifi Boot Img

Charge Light On- [BOOT] Wifi Light On - Downloads - Android Forum
Charge Light Off- [BOOT] Wifi Light Off - Downloads - Android Forum

Kernel

Tiamat 1.4.4- http://www.android.net/forum/downloads.php?do=file&id=74

Tiamat 1.4.4 (Stock GPU)- http://www.android.net/forum/downloads.php?do=file&id=75

LINK TO OP @ http://forum.xda-developers.com/showthread.php?t=978013

 

[Steady Hawkin]

Special Instructions​

Release Notes for 1.4.4: 1.7Ghz is likely as far as we can push the Tegra2 cores. We have stress tested the heck out of 1.7 and it is safe. However, safe does not mean stable. Personally, I can run 1.7 on Interactive governor all day and it's smooth as butter. Other folks get reboots. If you can not run at 1.7, try 1.6. Everybody who tested was able to run at 1.504 without any problems. Just because this release is clocked to 1.7, that does not mean you can not run at stock speeds. Simply do not overclock. The settings for 1Ghz are identical to stock settings. I HIGHLY RECOMMEND you leave your device on INTERACTIVE. You may use Performance solely for benchmarking purposes, but then PUT IT BACK.

USB Tether: Plug OTG cable into Xoom. Plug phone with microUSB cable into OTG cable. On phone, enable USB Tether. On Xoom, run the following in terminal or script manager (Scripter, GScript, Tasker) of your choice.

Code:

dhcpcd usb1
setprop net.dns1 8.8.8.8

The Xoom will not show any indication that there is a network connection. But pull up your browser and surf away. Like I said earlier, I tested this personally on the Evo with a Sense rom. It works perfect. However, there are countless devices out there. Your experience may vary.

 

[Steady Hawkin]

-Change Log-​

Version 1.4.4

Introducing 1.7Ghz Overclock!

All frequency steps built in. 1.2, 1.408, 1.504, 1.6, and 1.7!

Two versions. Overclocked GPU and Stock GPU [request filled]

USB Tether work for real now! I personally tested with my Evo running Konikub's Evo Elite III Sense Froyo Rom. See below for script.

Added Realtek 8150 USB Ethernet Dongle Module [request filled]

Usb Mass Storage now stock in build. Visit Mass Storage Tool Thread by dinomight for implementation. (thanks Kcrudup for turning on lun0 for us ;D )

Please see important release notes for this build.

Version 1.4.3

Fixed second core scaling wake issue. Thanks TDR

Only need a single build now as scaling works the way it should

Brought back 2.6.36.4 (thanks Cybertronicz for digging it up)

Autogroup Scheduler brought back (by Cybertronicz from .38 tree)

Now using SLUB allocator

Eliminated even more debug bloat

HFS and HFSPlus file system modules for Mac users [request filled]

Usb Mass Storage now stock in build. Visit Mass Storage Tool Thread by dinomight for implementation. (thanks Kcrudup for turning on lun0 for us ;D )