Joined
·
8 Posts
I posted this problem in another thread on RW. It stated:
[background=rgb(245, 245, 245)]When I flash the new ROM, my nav bar home button becomes inop. Back and "history" fine. I have tried to make sure the settings are correct in the navbar section.[/background]
[background=rgb(245, 245, 245)] don't dirty flash. Factory wipe -> cache partition -> wide dalvik -> flash ROM. I also make sure it is a toro ROM. [/background]
[background=rgb(245, 245, 245)]It will only happen between the two ROMs and not a same developer update Even if I then go back (Carbon->liquid->carbon) it still happens.[/background]
[background=rgb(245, 245, 245)]The only way to clear the problem is to totally reset with Wug's toolkit. [/background]
[background=rgb(245, 245, 245)]Ideas? Thanks in advance.[/background]
Now, I got back and was on release 1.6 and doing nightlies until 1.7 hit. I flashed that ROM and things went down hill from there. I should probably mention I use Trinity TNP1344-384-JB4.2.2-Stable1. Well my toro got real laggy and kinda pissy about doing anything.
Wipe the three I know about (factory reset, cache and dalvik) and tried to revert to 1.6 and now I'm all sorts of jacked up. In addition to my home button being inop, I have the tactile feel of it being pressed but no action. The phone now has no internet connection. Both WiFi and 4g icons are white with no connection. I can call out but no incoming.
Tried going all the way back to release 1.0 still no luck with any of it. .
Unroot -> flash stock -> lock bootloader. Unlock -> reroot. At this point everything is working as it should. Home button, WiFi and 4g.
Reboot into recovery -> factory reset -> wipe cache -> wipe dalvik -> format system -> flash 1.6 -> no home, WiFi or 4g. I can't even find a way to log back into my gmail. I did log in after the reroot so I could turn on adb.
It seems like to keep everything running, I need to be running the VZW ROM with or without root.
Any help would be great especially how to get back on Carbon.
Thanks in advance
[background=rgb(245, 245, 245)]When I flash the new ROM, my nav bar home button becomes inop. Back and "history" fine. I have tried to make sure the settings are correct in the navbar section.[/background]
[background=rgb(245, 245, 245)] don't dirty flash. Factory wipe -> cache partition -> wide dalvik -> flash ROM. I also make sure it is a toro ROM. [/background]
[background=rgb(245, 245, 245)]It will only happen between the two ROMs and not a same developer update Even if I then go back (Carbon->liquid->carbon) it still happens.[/background]
[background=rgb(245, 245, 245)]The only way to clear the problem is to totally reset with Wug's toolkit. [/background]
[background=rgb(245, 245, 245)]Ideas? Thanks in advance.[/background]
Now, I got back and was on release 1.6 and doing nightlies until 1.7 hit. I flashed that ROM and things went down hill from there. I should probably mention I use Trinity TNP1344-384-JB4.2.2-Stable1. Well my toro got real laggy and kinda pissy about doing anything.
Wipe the three I know about (factory reset, cache and dalvik) and tried to revert to 1.6 and now I'm all sorts of jacked up. In addition to my home button being inop, I have the tactile feel of it being pressed but no action. The phone now has no internet connection. Both WiFi and 4g icons are white with no connection. I can call out but no incoming.
Tried going all the way back to release 1.0 still no luck with any of it. .
Unroot -> flash stock -> lock bootloader. Unlock -> reroot. At this point everything is working as it should. Home button, WiFi and 4g.
Reboot into recovery -> factory reset -> wipe cache -> wipe dalvik -> format system -> flash 1.6 -> no home, WiFi or 4g. I can't even find a way to log back into my gmail. I did log in after the reroot so I could turn on adb.
It seems like to keep everything running, I need to be running the VZW ROM with or without root.
Any help would be great especially how to get back on Carbon.
Thanks in advance
