Android OS Forum banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
47 Posts
These radios are for the CDMA HTC Evo 3D (e.g. Sprint).
Do NOT flash these radios on a GSM HTC EVO 3D!

Code:
/* I am not responsible for bricked devices, dead SD cards,<br />
* thermonuclear war, or the end of the world. Please do some research<br />
* if you have any concerns about flashing a radio before flashing it!<br />
* YOU are choosing to make these modifications, and if you point the<br />
* finger at me for messing up your device, I will laugh at you. */
How to Flash:

In order for this to work, the HTC Evo 3D needs to be S-OFF. Flashing the radio with a corrupt file or interrupting the flash, can brick the device, please proceed with caution.
  1. Download the your choice of radio for the HTC Evo 3D.
  2. Make sure the filename is PG86IMG.zip exactly or it will not work and copy it to the same folder as adb (the /platform-tools folder within the Android SDK folder).
  3. Connect the HTC Evo 3D to the computer via USB.
  4. On the computer, open terminal and run the following commands:
    Code:
    adb push PG86IMG.zip /sdcard/PG86IMG.zip<br />
    adb shell md5sum /sdcard/PG86IMG.zip
    NOTE: The md5 should match up the provide the original download location. If not, redownload & try again.
    Code:
    adb reboot bootloader
  5. The HTC Evo 3D will reboot & usually boot into fastboot. Pressing the Power button will put the device into the bootloader.
  6. The bootloader will scan for the radio update. Once it finds the update, select Yes.
  7. Allow the bootloader to finish flashing the updated radio, and reboot the HTC Evo 3D normally.

Downloads:

From Gingerbread-based RUUs:
  • From the 1.07.651.1 RUU:
    • CDMA: 0.97.00.0513
      md5: fdec2ed4be3b35a9b190da8085dc8a0d
    • WiMax: no WiMax radio was included in this leak
  • From the 1.11.651.2 RUU (Stock):
    • CDMA: 0.97.00.0518
      md5: 5f6f35dedf37921438b056db8590ff1e
    • WiMax: 28735
      md5: 78c03fb844b7761d0d6611bf7e8b3791
  • From the 1.13.651.7 OTA/RUU:
    • CDMA: 0.97.10.0530
      md5: 0ab6aeb4ca9421d5ea8e9ced722554bc
    • WiMax: 29047
      md5: 3123a4a3654cf5d22228117258702b21
  • From the 2.08.651.2 OTA/RUU:
    • CDMA: 0.97.10.0808
      md5: a8acc161e58d3e2d3d1cd4954975802b
    • WiMax: contains the same WiMax radio from the 1.13.651.7 OTA/RUU
  • From the 2.17.651.5 OTA:
    • CDMA: 1.06.00.1216
      md5: 84cd45b311bb176457cd32e45839529a
    • WiMax: no WiMax radio was included in this OTA
  • From the 2.89.651.2 OTA:
    • CDMA: 1.09.00.0706
      md5: 3fa00b5e3e8b9bcdbe3e325e8609dbfa
    • WiMax: no WiMax radio was included in this OTA
 

·
Premium Member
Joined
·
47 Posts
Discussion Starter · #4 ·
I have moved my radios to a new subdomain, since this device is supported by CM & the other subdomain has a bit more bandwidth to play with. So if you been linking to my host, please up you links.
 

·
Registered
Joined
·
5 Posts
Issue updating radio past baseband ver. 0.97.10.0530.
Everytime i update per instructions phone operates fine,but when in sleep mode approx. ten min. later phone reboots.
Would this be an md5 problem?
Should radios be updated with a stock rom first ,then flash custom?
Any information appreciated.Thank you.

Evo 3d
downgraded hboot 1.4
Roms used:team genesis ics and viper ics
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top