Android OS Forum banner
1 - 4 of 4 Posts

Premium Member
47 Posts
/* I am not responsible for bricked devices, dead SD cards,<br />
 * thermonuclear war, or the end of the world. Please do some research<br />
 * if you have any concerns about flashing a radio before flashing it!<br />
 * YOU are choosing to make these modifications, and if you point the<br />
 * finger at me for messing up your device, I will laugh at you. */
How to Flash:
In order for this to work, the HTC Glacier needs to be S-OFF. Flashing the radio with a corrupt file or interrupting the flash, can brick the device, please proceed with caution.

  1. Download the your choice of radio for the HTC Glacier.
  2. Make sure the filename is exactly or it will not work and copy it to the same folder as adb (the /platform-tools folder within the Android SDK folder).
  3. Connect the HTC Glacier to the computer via USB.
  4. On the computer, open terminal and run the following commands:
    adb push /sdcard/<br />
    adb shell md5sum /sdcard/
    NOTE: The md5 should match up the provide the original download location. If not, redownload & try again.
    adb reboot bootloader
  5. The HTC Glacier will reboot & usually boot into fastboot. Pressing the Power button will put the device into the bootloader.
  6. The bootloader will scan for the radio update. Once it finds the update, select Yes.
  7. Allow the bootloader to finish flashing the updated radio, and reboot the HTC Glacier normally.

From Froyo-based RUUs:
From Gingerbread-based RUUs:
1 - 4 of 4 Posts