Android OS Forum banner

[RADIOS] All Baseband Updaters

79K views 163 replies 56 participants last post by  joeallsdroid 
#1 · (Edited by Moderator)
These are the baseband versions available for the Verizon Droid X.
Listed in order from oldest to newest.

Just flash in clockworkmod recovery. No mounting or wiping needed.

NOTE: THESE CAN ONLY BE FLASHED WHILE ON THE FROYO KERNEL (except for 15P, see link below).

1.09.07P (Extracted from rom 2.3.340)
DOWNLOAD HERE
MD5: c3a8f332a8e8ed3f2da1652a7b6a4338

1.09.12P (Extracted from rom 4.5.596)
DOWNLOAD HERE
MD5: d9e6f96a6b1ac133f987221d5233d4e7

1.09.13P (Extracted from rom 4.5.602)
DOWNLOAD HERE
MD5: a24d68c5314d4d66beae9961ce3034a3

1.09.15P (Extracted from rom 4.5.621)
go here http://rootzwiki.com...140#entry833317

NOTE: After flashing a baseband updater, you may have to reactivate your phone by dialing *22899 or by dialing *228, then choosing option 1.
 
See less See more
#13 ·
razorloves said:
These are the baseband versions available for the Droid X.
Listed in order from oldest to newest.

Just flash in clockworkmod recovery. No mounting or wiping needed.

1.09.07P (Extracted from rom 2.3.340)
http://www.multiupload.com/5PRHMGVMA5
MD5: c3a8f332a8e8ed3f2da1652a7b6a4338

1.09.12P (Extracted from rom 4.5.596)
http://www.multiupload.com/VXWJFY3L6X
MD5: d9e6f96a6b1ac133f987221d5233d4e7

1.09.13P (Extracted from rom 4.5.602)
http://www.multiupload.com/2S87NIKXDR
MD5: a24d68c5314d4d66beae9961ce3034a3

NOTE: After flashing a baseband updater, you may have to reactivate your phone by dialing *22899 or by dialing *228, then choosing option 1.
when this new radio first came out, i downloaded and flashed the 1.09.13P and came up with the following MD5:
13464f2f6db5c9050b51e6d0e82dbe44e

which is different from this. it seems to work, but now have to reboot numerous times to get signal back. My QUESTION: can i flash the correct one (listed here) over what i already have, and correct this, or will that cause problems? thanks for all the good work, and appreciate the help.
 
#14 ·
"goldsmitht said:
when this new radio first came out, i downloaded and flashed the 1.09.13P and came up with the following MD5:
13464f2f6db5c9050b51e6d0e82dbe44e

which is different from this. it seems to work, but now have to reboot numerous times to get signal back. My QUESTION: can i flash the correct one (listed here) over what i already have, and correct this, or will that cause problems? thanks for all the good work, and appreciate the help.
You can flash it ontop of yours. Wont hurt anything and might fix your problem. Mine have a different md5 cuz I packaged it differently. Still has the same radio inside it, though
 
#20 ·
ganggreen777 said:
Totally new to root. Just updated to 19 last night.

Don't understand this baseband jargon......
I just check my version is "unknown"

What update do I need? And what does the baseband do? (for dummies)

3G/wifi or better phone service bar stuff?

What do I need to do? Step by step
it can increase or decrease the quality of your voice and data connection. it can affect battery life too. if you want to try a different one out, then just put the zip file on your mem card and boot into clockworkmod recovery and install it. thats it
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top