Android OS Forum banner
1 - 20 of 26371 Posts

· Recovering Flasher
Joined
·
640 Posts
This is probably a complete noob thing, but terminal doesn't seem to behaving the same in 1.7. I'm trying to use leantweaks and i can get su fine but when i try 'lt' it says command not found. The lines are starting off with 'sh-3.2' which doesn't seem normal iirc. Any ideas?
u have to open terminal emulator and in preference uncheck verify path entries.

Sent from my Galaxy Nexus using Tapatalk 2
 

· Recovering Flasher
Joined
·
640 Posts
yeah I heard about that. But I can confirm it does work right now on 2.6
Also GPS does work for me. It did take a little longer to get a lock but I Dont use faster GPS I use GPS status I think it Worms better cause u can see how many satellites you lock on and than it pin points tour location


Sent from my Galaxy Nexus using Tapatalk 2
 

· Recovering Flasher
Joined
·
640 Posts
Well, just like Adobe said..... this must be a close to official build cause adobe flash is no longer compatible. sorry if this was already mentioned in regards to 2.6
its no longer compatible but it still works on 4.1.1. also when you look at there app info it does say they Will not support anything above 4.x.x? I'm not sure if that means when that four hits a five or when those x hit ones???

Sent from my Galaxy Nexus using Tapatalk 2
 

· Recovering Flasher
Joined
·
640 Posts
Yes, I am experiencing the same issue.

Factory Reset
Wiped Dalvik
Format / System

When attempting to install the rom, the following is displayed:

Finding update package...
Installing update package...
assert failed: getprop("ro.product.device") == "toro" || get prop("ro.build.product") == "toro"
E: Error in /sdcard/jellybelly-3.4.zip
(Status 7)
Installation aborted.

I am coming from JellyBelly 2.5

Anyone else run across this issue. I tried downloading the file a few times, the MD5's always match but I get the same error anyway.
hey I experienced this when jumping from 2.5 yesterday what I did what not use cwm to flash and used twrp instead:) hope this works it worked for me.

Sent from my Galaxy Nexus using Tapatalk 2
 

· Recovering Flasher
Joined
·
640 Posts
can someone PLEASE help me... earlier my phone was stuck on google so i went to wipe the phone and to reinstall 3.4 and when that happened I got

Finding update package...
Installing update package...
set_perm: some changes failed
E: Error in /sdcard/jellybelly-3.4.zip
(Status 7)
Installation aborted

I am trying to install twrp but my computer doesnt detect my phone and under device manager the phone comes up as "full"
I ran into this coming from 2.5 and my solution was to flash twrp but since that's not an option do u have an older version or a backup? That's the only thing I can think off?

Also when u get stuck at the Google logo you really do got to give it some time, I learned this just recently I'm starting to get long boot times

Sent from my Galaxy Nexus using Tapatalk 2
 

· Recovering Flasher
Joined
·
640 Posts
Just install it/ go into fast boot mode on your phone make sure your drivers are installed, there is Evan a button on the top that guides you through the process to get drivers installed properly. I think its the 7 or 8 page were a black window will pop up and test to see if the tool can recognized your phone by displaying the serial number if that work all you got to do is hit the button that says flash back to stock and won't boot

Sent from my Galaxy Nexus using Tapatalk 2
 
1 - 20 of 26371 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top