Android OS Forum banner
Status
Not open for further replies.
201 - 214 of 214 Posts

·
Registered
Joined
·
34 Posts
I know you stopped development on this ROM, but my lord this thing is AWESOME! I had to register just to tell you how great it was! :) I tried the ICS version, but I was having problems copying over some of my settings with Titanium (most importantly, my messages) so I tried this one out instead. I know the other ones are still WIP but I'll be staying with this ROM for now!

Only question, do I have the ability to flash Swype onto here? That and my group texts (which I think there's a substitute for on the market) are the only things I think are missing. Thanks again!

*EDIT* - Didn't realize group text was already on there, just looks different! Got Swype installed, perfect phone now! :) Thanks again!
 

·
Registered
Joined
·
128 Posts
Hey Undead,

I don't usually make requests, however, would you be willing to make a flashable zip to add the network speed hack to your Expresso ROM?

As you are heading out and moving on this may be the last chance to ask. I truely love the ROM and am getting irritated by the little issues with the ICS ROMs (WiFi calling for one and lockscreen phone answering).

Thanks regardless,

Coug

Sent from my myTouch_4G_Slide using Tapatalk
 

·
Registered
Joined
·
11 Posts
Is there any way to install this rom without S-OFF? I am not able to get S-OFF on this device.

When I run Revolutionary, I receive this error message:
Your device: doubleshot, with HBOOT 1.45.0013 is not supported at this time.

I understand that as of the 12/22/2011 ota update, S-OFF cannot be obtained.

Am I correct? Or can S-OFF be obtained somehow???

Thanks for any help!!

Jason
 

·
Banned
Joined
·
1,804 Posts
Discussion Starter · #207 ·
Hey Undead,

I don't usually make requests, however, would you be willing to make a flashable zip to add the network speed hack to your Expresso ROM?

As you are heading out and moving on this may be the last chance to ask. I truely love the ROM and am getting irritated by the little issues with the ICS ROMs (WiFi calling for one and lockscreen phone answering).

Thanks regardless,

Coug

Sent from my myTouch_4G_Slide using Tapatalk
I believe i already added that to this rom. Post the build.prop so i can make sure. It involves build.prop mods and several framework mods. I just need to be sure the build.prop is modded. If it isnt i will request the framework needed and make the needed changes.

Sent from my SPH-D710 using Tapatalk
 

·
Banned
Joined
·
1,804 Posts
Discussion Starter · #208 ·
Is there any way to install this rom without S-OFF? I am not able to get S-OFF on this device.

When I run Revolutionary, I receive this error message:
Your device: doubleshot, with HBOOT 1.45.0013 is not supported at this time.

I understand that as of the 12/22/2011 ota update, S-OFF cannot be obtained.

Am I correct? Or can S-OFF be obtained somehow???

Thanks for any help!!

Jason
As of now the only way to get close to S Off is Htc unlock tool. It will keep you S On but on an "Unlocked" state so u can flash roms and other stuff.

Sent from my SPH-D710 using Tapatalk
 

·
Registered
Joined
·
128 Posts
I believe i already added that to this rom. Post the build.prop so i can make sure. It involves build.prop mods and several framework mods. I just need to be sure the build.prop is modded. If it isnt i will request the framework needed and make the needed changes.

Sent from my SPH-D710 using Tapatalk
Here is the build.prop. thanks for looking at it.

ro.ril.oem.ecclist=911 ro.ril.enable.a53=1 ro.ril.enable.dtm=0 ro.ril.gprsclass=10 ro.ril.hsdpa.category=24 ro.ril.hsupa.category=6 ro.ril.hsxpa=3 ro.ril.hep=1 ro.ril.def.agps.mode=1 ro.ril.fast.dormancy.timeout=10 ro.ril.def.agps.feature=1 ro.ril.disable.fd.plmn.prefix=2340 2,23410,23411 ro.ril.enable.sdr=0 ro.ril.enable.gea3=0 ro.ril.enable.amr.wideband=0 ro.ril.rxd.mode.nv=10 ro.ril.bler.threshold.nv=125 ro.ril.rscp.threshold.nv=110 ro.ril.enable.rxd=1 ro.ril.oem.cnap=1 ro.ril.enable.r8fd=1 ro.com.google.clientidbase=android -tmobile-us ro.com.google.clientidbase.vs=andr oid-hms-tmobile-us ro.com.google.clientidbase.ms=andr oid-hms-tmobile-us ro.ril.enable.ganlite=1 ro.product.model= RubiX CubeD Extreme MT4GS

# begin build properties # autogenerated by buildinfo.sh

ro.aa.rid=108 ro.aa.skulist=531 ro.aa.customizationid=201767 ro.aa.mainsku=531 ro.aa.taskid=201815 ro.aa.romver=1.28.531.10 ro.aa.maincid=T-MOB010 ro.aa.cidlist=T-MOB010 ro.aa.project=Doubleshot ro.aa.modelid=PG5910000 ro.build.changelist=100059 ro.com.google.clientidbase=android -htc ro.aa.rid=108 ro.aa.skulist=531 ro.aa.customizationid=201767 ro.aa.mainsku=531 ro.aa.taskid=201815 ro.aa.romver=1.28.531.10 ro.aa.maincid=T-MOB010 ro.aa.cidlist=T-MOB010 ro.aa.project=Doubleshot ro.aa.modelid=PG5910000 ro.build.changelist=100059 ro.com.google.clientidbase=android -htc ro.build.id=GRJ22 ro.build.display.id=GRJ22 ro.build.version.incremental=10005 9 ro.build.version.sdk=10 ro.build.version.codename=REL ro.build.version.release=2.3.4 ro.build.date=二 12月 2 11:05:00 PST 2011 ro.build.date.utc=1309866226 ro.build.type=user ro.build.user=s.reid ro.build.host=ubuntu ro.build.tags=release-keys ro.product.model=HTC Doubleshot ro.product.brand=tmous ro.product.name=htc_doubleshot ro.product.device=doubleshot ro.product.board=doubleshot ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.manufacturer=HTC ro.product.locale.language=hdpi ro.product.locale.region=US ro.wifi.channels= ro.board.platform=msm8660 # ro.build.product is obsolete; use ro.product.device ro.build.product=doubleshot # Do not try to parse ro.build.description or .fingerprint ro.build.description= RubiX_CubeD_ExpressO ro.build.description=1.28.531.10 CL100059 release-keys ro.build.changelist=100059 ro.product.ua= ro.build.fingerprint=tmous/htc_doubleshot/doubleshot:2.3.4/GRJ22/100058:user/release-keys ro.build.project=201815 ro.product.version=1.28.531.10 ro.build.languageremove=0 keyguard.no_require_sim=1

# end build properties

# system.prop for doubleshot

ro.sf.lcd_density = 240

debug.fb.rgb565 = 0

rild.libpath=/system/lib/libhtc_ril.so # RilLibPath for Ganlite by Godel_Chen rild.libpath.ganlite=/system/lib/librilswitch.so rilswitch.vendorlibpath=/system/lib/libhtc_ril.so rilswitch.ganlibpath=/system/lib/libganril.so

# Modify MMS APN retry timer from 5s to 2s. ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000

# RF team request ro.ril.enable.a53 = 1 ro.ril.enable.dtm = 0 ro.ril.gprsclass = 10 ro.ril.hsdpa.category = 12 ro.ril.hsupa.category = 6 ro.ril.hsxpa=3 ro.ril.hep = 1

# Default network type. # 0 => WCDMA preferred. ro.telephony.default_network=0

wifi.interface=eth0 wifi.supplicant_scan_interval=30

# The OpenGL ES API level that is natively supported by this device. # This is a 16.16 fixed point number ro.opengles.version = 131072

# For VM Heap Control dalvik.vm.heapsize=72m

# For HSDPA low throughput ro.ril.disable.power.collapse = 0

# For emmc phone storage ro.phone_storage = 0

# For ext4 file system ro.ext4fs = 1

# For FOTA setting (leave empty value to use default) ro.htc.checkin.url = http://andchin.htc.com/android/checkin ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash ro.htc.checkin.url_CN = http://andchin.htcco...android/checkin ro.htc.checkin.crashurl_CN = http://andchin.htcco...n/android/crash ro.htc.checkin.exmsg.url = http://fotamsg.htc.c...in.exmsg.url_CN = http://fotamsg.htcco...c.appupdate.url = http://apu-chin.htc..../and-app/update ro.htc.appupdate.url_CN = http://apu-chin.htcc.../and-app/update ro.htc.appupdate.exmsg.url = http://apu-msg.htc.c...rws/and-app/msg ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htcco...rws/and-app/msg

# Release Bluetooth HW/SW information ro.bt.chipset = Broadcom BCM4329-B1 ro.bt.stack = Broadcom BTL-A ro.bt.stack.version = 2.0.50.032 #0x10000010010100100000011 represent bt profile list ro.bt.profiles = 4270339

# Properties of BTLA stack service.brcm.bt.activation = 0 service.brcm.bt.srv_active = 0 service.brcm.bt.hcid_active = 0 service.brcm.bt.btld = 0 service.brcm.bt.btld_pid = 0 service.brcm.bt.avrcp_pass_thru = 0 service.brcm.bt.avrcp_toggle = 0

# For quick boot mode persist.sys.shutdown.mode = hibernate

# For opensense sdk ro.htc.common.version = 2.0.0.0

# Properties of Scalado Denoise param. postprocess.iso_midband = 400 postprocess.denoise_level = 5

# Properties of Burst mode param. persist.camera.burst.interval = 200

# Following property will be reference by Settings. ro.product.processor = 1.2 GHz dualcore ro.product.ram = 768MB ro.product.display_resolution = 3.7 inch WVGA resolution ro.product.main_camera = 8M ro.product.front_camera = VGA ro.product.bluetooth = 3.0 ro.product.wifi = 802.11 b/g/n

# For opensense sdk ro.htc.common.version = 3.0.0.0

# Extend key dispatching timeout keydispatchtimeout = 15000

# # ADDITIONAL_BUILD_PROPERTIES # ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html ro.url.legal.android_privacy=http: //www.google.com/intl/%s/mobile/android/basic/privacy.html ro.com.google.networklocation = 0 ro.setupwizard.mode=OPTIONAL ro.setupwizard.mode=OPTIONAL ro.config.ringtone=DroidX.ogg ro.config.notification_sound=Droid .ogg ro.config.alarm_alert=Alarm_buzzer .ogg ro.config.cal_notification=Droid.o gg ro.config.msg_notification=Droid.o gg ro.setupwizard.mode=OPTIONAL ro.com.google.gmsversion=2.3_r4 media.a1026.nsForVoiceRec=0 htc.audio.alt.enable=1 htc.audio.hac.enable=1 ro.setupwizard.enterprise_mode=1 ro.media.codec_priority_thumb=so dalvik.vm.dexopt-flags=m=y net.bt.name=Android dalvik.vm.stack-trace-file=/data/anr/traces.txt

# For Jpeg Quality ro.media.dec.jpeg.memcap = 8000000 ro.media.enc.hprof.vid.bps = 8000000 ro.ext4fs = 1

# For HTC Check in disabled ro.config.htc.nocheckin=1 ro.config.nocheckin=1

# battery saving pm.sleep_mode = 1

# video & speed debug.sf.hw = 1 debug.performance.tuning = 1 video.accelerate.hw = 1

# GPU Rendering enabled by default windowsmgr.max_events_per_sec = 200

# For built in screencapture service ro.htc.framework.screencapture=tru e

# For black screen while calling mot.proximity.delay = 600

# ROM version ro.modversion=RubiX-CubeD_ExpressO_v1.3_FINAL-BUILD_S.Reid_Signed

# For GPU rendering net.tcp.buffersize.default=4096,87 380,256960,4096,16384,256960 net.tcp.buffersize.wifi=4096,87380 ,256960,4096,16384,256960 net.tcp.buffersize.umts=4096,87380 ,256960,4096,16384,256960 net.tcp.buffersize.gprs=4096,87380 ,256960,4096,16384,256960 net.tcp.buffersize.edge=4096,87380 ,256960,4096,16384,256960

# For Dalvik Wipe Speed by default dalvik.vm.execution-mode = int:fast

# Disable debugging by default persist.adb.notify = 0

# For VVM by default HorizontalVVM = true HorizontalBUA = true

# Other Settings ro.telephony.call_ring.delay = 200

Sent from my RubiX CubeD Extreme MT4GS using Tapatalk
 

·
Registered
Joined
·
34 Posts
Here is the last version of Rubix ExpressO 1.3 I was able to get. I'm almost certain I got it AFTER UndeadK9 already left, so it should be the latest. It'll be up until Dropbox says it's sucked down too much bandwidth or I need the space. Feel free to update the link in the first post too! *NOTE* - this contains TWO .rar files, one is the FULL install of 1.2, and then the PATCH to 1.3.

Rubix ExpressO 1.3 - http://db.tt/CLIuRqkG
 
201 - 214 of 214 Posts
Status
Not open for further replies.
Top