[matjmonk]

Something else a bit weird that just started, when I try to listen to my Audible ebooks, the playback will all of the sudden stop, I'll hear some system notification tones and then the playback will start again only to have the cycle happen all over again in a few seconds. I watched the application and I do see where the "play" button shows a pause and then playback. Also, it looks like the system menu is being toggled since the status bar will get pulled down and then snap back up (and I'm leaving the DX sitting flat and untouched during this). So, I'm going to SBF back to 605 and start all over again with the whole process.

 

[ufjay5]

I don't know what I am doing wrong but it is not working. When I use terminal it says file not found and when I use script manager same thing

 

[mr_brady]

Droid X. Liberty 3 2.0 ROM. When I was installing the script through terminal I used the menu options to reboot. When I found out it wasn't working, I exited terminal and I manually booted into CWR and tried flashing the flashme.zip file.

Okay, must not have had enough coffee this morning or something. Flashed fine the second time I went through the OP. Scared the crap out of me with the formatting notice.

 

[iluvamk]

Okay, must not have had enough coffee this morning or something. Flashed fine the second time I went through the OP. Scared the crap out of me with the formatting notice.

LOL!!

 

[ufjay5]

I don't know what I am doing wrong but it is not working. When I use terminal it says file not found and when I use script manager same thing

I tried and said file not found

 

[dvschnk]

mr_brady, did you get the conservative govenor to work after you finally got it to install. I'm on Liberty 3 2.0, for DX, and I can't get the conservative govenor to show up anywhere...I usually use quickclock, but its also not in liberty's own govenor selector. All I have is ondemand, userspace, and performace. For BMc08GT, I flashed the flashme.zip, and even in the togglemods, it says the conservative govenor is on. It is the only mod that I have installed right now.

 

[mr_brady]

mr_brady, did you get the conservative govenor to work after you finally got it to install. I'm on Liberty 3 2.0, for DX, and I can't get the conservative govenor to show up anywhere...I usually use quickclock, but its also not in liberty's own govenor selector. All I have is ondemand, userspace, and performace. For BMc08GT, I flashed the flashme.zip, and even in the togglemods, it says the conservative govenor is on. It is the only mod that I have installed right now.

Yeah, the conservative script seems to work just fine once I turned it on with togglemods and rebooted. I also cleared cache and dalvik. I'm using Rom Toolbox Pro and it sees the conservative governor when I go into the Performance tab.

 

[flybass]

i actually couldn't get the conservative governor to show up in QC until i did a sbf

 

[dvschnk]

Did you instal then flash flashme.zip then reboot then toggle? Mine shows up in setcpu and QC just fine. If it's done out if order it won't show but will say it's toggled

I installed, and chose only the conservative govenor, which created the flashme.zip. I rebooted into recovery, and flashed the zip. Upon startup, I ran toggemods, and turned on the conservative govenor. Rebooted. Then no conservative govenor. If I'm reading your post right, I need to flash flashme.zip, start back up, reboot again, then do togglemods, turn the govenor on, reboot, then profit

.

 

[bowlingotter]

Anyone else still having an issue with switching between Wifi and 3G after installing PB? Droid X MIUI 1.10.21

 

[BMc08GT]

Ok link has been pulled temporarily. Trying to figure out what the hell is going on with D2/D2G. Its not inserting the update-binary anf updater-script into flashme.zip like it should be. I will be looking into some more hopefully later tonight/tomorrow. Thanks for understanding.

If you guys would like some more features added in, quote the future release notes post and let me know.

 

[BMc08GT]

Did you get the info about the app I use for lights off? Just checking, no rush lol

May or may not get to it tonight. It will definitely be looked into tho

 

[asmedbeats]

I don't really know if its my newb tendencies but when I run the powerboost script through script manager it unthrottle's properly and I exit using option 10. When I go into recovery to install flashme.zip it aborts. I have a DX running cm4dxgb by rev. Thanks in advance

 

[asmedbeats]

I don't really know if its my newb tendencies but when I run the powerboost script through script manager it unthrottle's properly and I exit using option 10. When I go into recovery to install flashme.zip it aborts. I have a DX running cm4dxgb by rev. Thanks in advance

nevermind I figured it out lol

 

[tmar23]

Anyone else still having an issue with switching between Wifi and 3G after installing PB? Droid X MIUI 1.10.21

I had the issue once after the first try, but have not had it since.

 

[BMc08GT]

RC is now uploading.....running it by D2G/D2 test and will be back in OP...Changed up option 10 to have the user select their device(like unthrottle used to use) for ease of use

EDIT: I actually need a D2/D2G tester... ready...set...PM me!

 

[Maverick39]

I have PB2.2 up and running but when I open twittdeck it seems to be a bit laggy

 

[BMc08GT]

RC is now uploading.....running it by D2G/D2 test and will be back in OP...Changed up option 10 to have the user select their device(like unthrottle used to use) for ease of use

EDIT: I actually need a D2/D2G tester... ready...set...PM me!

Oh D2/D2G testers........i need you!

Also im including some test tweaks I came across that were introduced by 0vermind (DX2 dev on DXF). Not sure how they will react/play but if they seem to work well I will see about including them officially(Toggles) with full credit to 0vermind.

 

[wizard0f0s]

Just wanted to put this out there for anyone having issues with 3g / wifi. I had the same issues on 2.1. I had to SBF 2 nights ago before I could try 2.2 (Droid X decided it wanted to lose root for some reason, completely unrelated to PB). Since then, I put 2.2 on amd haven't had any issues going from wifi to 3g and back. So there seems to be a break down on the phone / rom and an SBF and reflash your rom clean appears to fix it.

 

[bowlingotter]

Just wanted to put this out there for anyone having issues with 3g / wifi. I had the same issues on 2.1. I had to SBF 2 nights ago before I could try 2.2 (Droid X decided it wanted to lose root for some reason, completely unrelated to PB). Since then, I put 2.2 on amd haven't had any issues going from wifi to 3g and back. So there seems to be a break down on the phone / rom and an SBF and reflash your rom clean appears to fix it.

Thanks, for some reason I can't seem to shake the issue. Have SBF'd and reflashed multiple times, always redownloading, always checking md5s and everything. Just to make sure I'm not crazy, I SBF'd again today and reloaded MIUI 1.10.21 and I'm going to use it for a few days without touching PB at all to see if the issue happens on its own.