Android OS Forum banner
1 - 7 of 20 Posts

· Android Apprentice
45 Posts
Discussion Starter · #1 ·
Im getting one of these, and just thought i'd drop it here, for other people.

im not entirely sure it will work, will post when i get it (im from australia, not sure when i will)

Yes its for an ipad (one), which is basically the same size (0.8mm thinner or something). i reckon i can get it to work on WebOS, bluetooth is pretty simple. Any one else use something simular?

This was the cheapest one, and it had 450mA batter (some only had 250), AND it had apostrophie in the right position (some didnt) BUT if your interested here are some others (so full view

and this one for galaxy tab (if your intersted)

· Android Apprentice
45 Posts
codycoyote said:
Sorry, I don't know if it'll fit to HP touchpad, but I don't think so, because the dimensions are different. I ordered mine for my Ipad 2, but will also test if it works and fit with the HP

oh and from wiki:

Touch Pad

240 mm (9.4 in)
190 mm (7.5 in)
13.7 mm (0.54 in)


9.50 in (241 mm) (
7.31 in (186 mm)
0.346 in (8.8 mm)

ipad 1(1st gen, 2nd gen is same as ipad 2)

9.56 in (243 mm) (h)
7.47 in (190 mm) (w)
.5 in (13 mm) (d)

so as i said, most cases should fit, it may be a bit tighter (as ipad 2 is thinner ) BUT the first case, which i bought, is for an ipad 1
1 - 7 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.